Find Your Perfect Fence
Your fence should suit the way you use your outdoor space. Start with your main priority, then compare privacy, appearance, material and installation requirements.
Explore aluminum and steel fencing for homes, gardens and project supply—with coordinated gates to complete your boundary.
Find My Fence StyleDiscuss My Project
What do you need your fence to do?
A private patio, an open front garden and a swimming pool need different designs. Choose a starting point below, then refine the panel layout around your site.
Match a fence style to your space
Use these starting points to build a shortlist. Final dimensions, openings, mounting and hardware should be checked against your project requirements.
Clôture à lattes horizontales
Give patios and boundaries a clean horizontal rhythm. Choose closer spacing for screening or a more open arrangement for light and views.
Explore horizontal fencing →
Clôture à lattes verticales
Upright lines complement entrances and garden walls. Adjust spacing to balance separation with daylight. Compare clôture à lames verticales for a deeper architectural profile.
Explore vertical fencing →Clôture de piscine en aluminium
Start with an open design that preserves sightlines around the water. Plan gate position, access routes and hardware at the same time as the fence layout.
Provide the local pool barrier requirements for review before ordering; suitability depends on the complete installed system.
Explore pool fencing →Clôture à piquets en aluminium
Define a garden without closing off its view. For pets, consider the animal’s size, climbing or digging behavior, the bottom clearance and every gate opening.
Share the required clear gaps in your drawings rather than selecting by appearance alone.
Explore picket fencing →Aluminum Louvre Fence
Angled blades can interrupt direct views while retaining ventilation. Screening varies with blade angle and viewing direction—review a section drawing from both sides.
A useful option to compare for patios, service areas and landscaped boundaries.
Explore louvre fencing →
E-Coated Steel Fence
Prefer a steel design? Compare ornamental profiles and specify the substrate, pretreatment, E-Coat and final finish in the quotation. Confirm the coating system for the selected product.
Explore E-Coated steel fencing →Compare the details that matter
| Your priority | Start by comparing | Confirm before ordering |
|---|---|---|
| Private outdoor seating | Close-spaced slats or louvres | Views through gaps, panel height and wind exposure |
| Open garden outlook | Pickets or open vertical slats | Clear openings, boundary position and gate access |
| Swimming pool boundary | Purpose-designed pool fencing | Local requirements and the complete fence and gate arrangement |
| Contemporary architecture | Horizontal slats or vertical blades | Profile proportions, alignment and matching gates |
| Commercial perimeter | Steel or engineered aluminum systems | Access control, panel construction, foundations and site demands |
Coordinate your fence with your building
Bring together the colors of window frames, paving, walls and gates. Use a physical finish sample to confirm the final choice; screen colors are illustrative.
Ask about powder-coated colors and wood grain finishes for the selected aluminum system. Check availability, texture, sample approval and order quantity before finalizing your specification.
A good fence starts with a measured layout
Coastal or exposed locations
Share the distance from the sea, exposure and maintenance conditions. Review finish preparation, fasteners and care requirements together. Explore our coastal aluminum fence solutions.
Slopes and uneven ground
Record the level change along each fence run. Compare stepped panels with a raked design where the chosen system allows it. Check bottom gaps and gate swing clearance.
Wind and solid panels
Greater screening changes wind loading. Provide site wind criteria so panel spans, post sections, connections and foundations can be assessed for the location.
Walls, posts and fixing points
Confirm whether posts are embedded, base mounted or fixed between existing pillars. The supporting substrate and anchors need to suit the selected system.
Plan matching gates from the start
Carry the panel style, finish and spacing through to your entrance. Measure the clear opening and identify pedestrian access, vehicle access and available operating space.
Compare swing gates where there is room to open, or sliding gates where there is sufficient space along the boundary. Specify hardware, structural supports and any automation interface separately.
Browse Aluminum GatesTurn your preferred style into a clear enquiry
For contractors, distributors and project buyers, a complete enquiry helps avoid mismatched components and missing installation details. Include:
- Destination and application: country, project location and intended use.
- Mise en page : total fence length, corners, level changes and gate positions.
- Panel specification: height, width, preferred profile and clear spacing.
- Materials and finish: aluminum or steel, profile requirements, color and texture.
- Installation scope: posts, mounting method, brackets, caps, hinges and latches.
- Supply requirements: quantities, packaging, delivery address and target schedule.
Custom dimensions are subject to design review, fabrication limits and transport considerations. Review the itemized quotation and approve drawings before production.
View Wonderful Metal project cases →Fence selection questions
Which fence should I choose for privacy?
Start with close-spaced horizontal or vertical slats, then compare louvres if ventilation matters. Review the actual gaps, angles and viewing positions before choosing.
Can a standard garden fence be used around a pool?
Pool barrier suitability requires a separate review of the panel, openings, gates, hardware and installed layout against the requirements for your location. Tell us it is a pool project at the enquiry stage.
Can I order custom fence sizes and matching gates?
Send the desired dimensions and layout for review. Panel proportions, reinforcement, supports and packaging should be confirmed together with the matching gate design.
How do I compare fence quotations fairly?
Compare the same material, profile sizes, finish, panel dimensions, posts and accessories. Also confirm whether packaging, freight and installation are included in each offer.
What if more than one style suits my project?
Use different systems for different areas: a more private rear boundary and an open front fence, for example. Coordinate their colors and entrance details to keep the overall design consistent.
Ready to choose your fence?
Send a layout, reference photo or sketch. Tell us your priorities, dimensions, quantity and destination so we can discuss a suitable fence and gate combination.
Request a Fence RecommendationE-mail : [email protected]
Téléphone / WhatsApp : +86 15092174528
