Custom Aluminum Fence Quote Guide: Drawings, Sizes & Delivery Details
A useful custom aluminum fence quote begins with information that both buyer and manufacturer can interpret in the same way. Clear dimensions, quantities and delivery requirements help define what the price actually includes.
Use this guide to prepare a fence quotation request for Wonderful Metal, whether you are sourcing one project, a contractor package or a repeat distributor order.
What to Send for an Initial Fence Estimate
Start with a reference photo or product link, approximate height and total length, gate requirements, order quantity and destination. State which measurements are preliminary.
An early estimate can help compare design options. For a production order, replace assumptions with an agreed drawing and a complete component schedule. Any unresolved details should remain visible in the quotation.
Explore our aluminum fence systems to identify your preferred appearance before preparing the final brief.
1. Provide a Layout and Number the Fence Runs
A clear dimensioned sketch is a useful starting point. If available, include a readable PDF and the relevant CAD drawing for review. Ask the team to confirm file compatibility before sending specialist formats.
- Mark each straight run, corner and termination.
- Show existing walls, pillars and intended mounting surfaces.
- Identify pedestrian and vehicle entrances.
- Record ground levels where the fence follows a slope.
- Assign panel and gate references that match the quantity schedule.
- Put the drawing date and revision on every relevant sheet.
Include an elevation for special panels and enlarged details for unusual connections. When sending a reference photo, explain which features matter: profile proportions, privacy level, decorative elements or color.
Remove superseded drawings from the active order package or clearly mark them as obsolete. A quotation should identify the revision used.
2. Define Panel Sizes and Installation Dimensions
| Dimension | How to describe it | Common ambiguity to avoid |
|---|---|---|
| Panel width | Manufactured width, including or excluding the frame as identified | Confusing it with the opening between posts |
| Panel height | Overall product dimension | Confusing it with height above finished ground |
| Post spacing | State clear opening or center-to-center distance | Using an unlabeled distance |
| Profilo a doghe | Visible face, depth and required wall specification | Providing only the visible face dimension |
| Slat gap | Finished clear opening and pattern direction | Confusing clear gap with pitch |
| Post length | Full supplied length and intended mounting method | Omitting an embedded portion |
| Gate opening | Clear passage and leaf dimensions separately | Assuming opening width equals leaf width |
Use one dimension system consistently. If converting, 1 inch equals 25.4 mm and 1 foot equals 304.8 mm. Do not treat a nominal metric size as an exact imperial equivalent.
Specify the required material or performance brief where available. Final alloy, temper, profile sections and connections should be reviewed for the chosen design and project requirements.
3. List Panels, Posts, Gates and Accessories Separately
Total fence length alone does not define the order. Create a schedule with one line for each distinct size, finish or construction.
Panels & Supports
Separate repeated panels from closing panels and slope-specific sections. Count posts by unique location, then identify end, intermediate, corner and gate supports.
Reconcile shared supports so the same corner or gate post is not counted twice.
Gates & Hardware
Record gate quantity, opening method, direction, hardware and support requirements. Identify locks, hinges, stops and sliding components where applicable.
For an automated gate, agree the operator interface and who supplies the controls and safety equipment.
Clarify whether brackets, caps, fasteners and trim are included with each panel or listed separately. Record agreed spare quantities as additional items.
See our cancelli in alluminio coordinati e post options while preparing the component list.
4. Specify the Surface Finish Beyond the Color Name
“Black” or “woodgrain” leaves room for interpretation. State the color reference, gloss and texture, then identify any required sample approval.
- Powder coating: give the selected color reference and desired appearance.
- Finitura effetto legno: identify the pattern, tone and direction on visible surfaces.
- Project exposure: describe coastal or other demanding service conditions for review.
- Consistency: identify fence panels and gates that should share the same approved finish reference.
- Inspection: agree any specific appearance acceptance criteria before production.
Where visual matching is important, discuss an available physical sample. Phone photographs and screen colors should not be the only approval reference for a large order.
5. Provide the Destination and Receiving Conditions
For a delivery quotation, send the country, city and full postcode or the named receiving port. Identify whether the destination is a warehouse, jobsite or residential property.
| Information | Why it matters |
|---|---|
| Delivery point | Defines the destination against which the freight scope is offered |
| Access conditions | Helps determine suitable vehicle and receiving arrangements |
| Unloading equipment | Must suit the final package dimensions and weight |
| Required arrival date | Allows production and transport timing to be reviewed together |
| Packaging requirements | May affect protection, identification, handling and packed volume |
Request confirmation of the offered shipping terms, inclusions and exclusions. Identify responsibility for destination handling, applicable import expenses, inland delivery and unloading.
For a separate logistics proposal, contact BRF LOGISTICS with the shipment and destination details. Service availability and scope need confirmation for the individual route.
6. Review the Written Quotation Before Comparing Prices
Ask each supplier to quote the same drawing revision, quantities and specification. Identify any alternative profiles or excluded items beside the price.
- Product references and itemized quantities match the submitted schedule.
- Material, dimensions, finish and assembly stage are clear.
- Posts, accessories and gate hardware have an explicit supply scope.
- Packaging and delivery are included or separately identified.
- Currency, payment arrangements and quotation validity are stated.
- Production timing identifies its agreed starting conditions.
- Drawing or sample approval requirements are recorded.
- Product terms and the process for reporting shortages or damage are available for review.
Keep production completion, dispatch and delivery dates separate. If a measurement or finish changes, request an updated offer rather than assuming the original price and timing remain valid.
Copy This Structure for Your Inquiry
Subject: Custom Aluminum Fence Quote – [Project / Company]
Product: [Style or reference link]
Drawings: [Attached layout and revision]
Panel schedule: [Width × height, specification and quantities]
Slats: [Profile and clear gap]
Posts: [Types, sizes and mounting method]
Gates: [Openings, configuration and hardware]
Conclusione: [Color, texture and sample requirement]
Consegna: [Country, postcode / port and receiving conditions]
Arrival target: [Date]
Open questions: [Items still requiring confirmation]
For China factory purchasing, a coordinated brief helps review panels, posts, gates and packing together. Contractors and distributors can also include expected repeat quantities or phased project deliveries for quotation.
Custom Aluminum Fence Quote FAQs
Can I request a quote without a CAD drawing?
Yes. Start with a dimensioned sketch, reference images and quantities. Identify missing details so they can be clarified before production approval.
Is total fence length enough for an accurate price?
It can support an initial discussion, but a defined order needs panel sizes, supports, gates, finish and included accessories.
Should I specify panel size or post spacing?
Provide both where known and label them clearly. The connection geometry determines how the manufactured panel fits between the supports.
Can I ask for two design options?
Yes. Keep the common quantities and destination consistent, then clearly identify the differences in profile, spacing, finish or assembly format.
Will a quotation include shipping?
Ask for confirmation. Provide the named delivery point and receiving conditions so a defined transport scope can be quoted.
What if the site measurements change?
Send a revised drawing and schedule immediately. Request written confirmation of the impact on production, pricing and delivery.
Send Your Custom Fence Requirements to Wonderful Metal
Share the drawings and information you have, and clearly mark any open questions. We can review your product requirements and clarify the specification for an itemized quotation.
