+8615092174528

من الاثنين إلى الأحد: من الساعة 8 صباحًا حتى الساعة 10 مساءً

شعار معدني رائع

Wholesale Aluminum Fence Panels for Contractors

Wonderful Metal · Aluminum Fence Manufacturer in Shandong, China

Wholesale Aluminum Fence Panels for Contractors

Source panels, posts, gates, and installation hardware from one factory against a single job layout. Wonderful Metal quotes complete aluminum fence packages for fence contractors, installers, and builders who need the right parts for each run and opening.

Get the contractor materials list

What to include in a wholesale fence package

Fence panels

Choose horizontal privacy or semi-privacy panels, vertical slats or blades, or open pickets. List the finished height and nominal bay width by run. Confirm actual panel dimensions and any short bays on the shop drawings. Browse aluminum fence systems.

Posts and mounting

Separate line, end, corner, hinge, and latch posts. Show where each run terminates at a wall or turns a corner. Identify in-ground or base-plate mounting and flag steps, slopes, or changes in substrate.

البوابات المتطابقة

List pedestrian and driveway gates separately. For each opening, give the required clear width, opening method, swing direction or slide direction, infill, and finish. Ask for hinges, latches, locks, stops, and other applicable gate hardware to be itemized.

Connectors and hardware

Include panel brackets or channels, post caps, compatible fasteners, mounting plates, and any requested spares. Identify site-supplied anchors separately so the quote and installation plan use the same scope.

Measure by run and check the post count

Mark the length of each run, corners, ends, and gate openings. State whether dimensions are measured between post centers or clear faces. On an illustrative straight run with eight panel bays and one gate bay located between panels, there are ten post positions: two end posts, six line posts, and two gate posts. Count the hinge and latch posts once even when each also supports an adjoining panel.

List corner posts once per shared corner on multi-run layouts. Where a wall substitutes for a post, mark the connection and request the corresponding brackets. For a solid privacy design on an exposed site, share the project requirements and mounting details for review before the quote is finalized.

Copy this aluminum fence materials list

Select the template below and paste it into your RFQ. Replace the brackets with your quantities and attach a marked-up layout or drawing.

PROJECT / JOB REF: [name]
DELIVERY: [city, ZIP or postal code, country, required date]
LAYOUT: [length by run, total length, units, post reference, steps or slopes]
STYLE / FINISH: [panel style, RAL color, matte/gloss/texture]

PANELS
[qty] full-width panels — [nominal bay width × finished height, infill]
[qty] short/custom panels — [run IDs and dimensions]

POSTS
[qty] line posts
[qty] end posts
[qty] corner posts — [angles]
[qty] gate hinge posts / [qty] gate latch posts
Mounting — [in-ground / base plate, substrate, by run]

GATES
[qty] pedestrian gates — [clear opening width × height, handing and swing]
[qty] driveway gates — [clear opening width × height, swing or slide]
Gate hardware — [hinges, latch/lock, stops, other requirements]

FITTINGS
[qty] post caps / [qty] brackets or channels / [qty] fastener sets
[qty] base plates or covers / [qty] spare fittings
Site-supplied items — [anchors, fixings, or other items]

PACKING AND QUOTE
[flat-packed / preassembled] — [label by run, bundle size limits]
Quote scope — [itemize product, packaging, delivery and requested trade term]
Attachments — [marked-up layout, drawings, photos, project specifications]

Confirm the quote before releasing the order

  1. Check the bill of materials against the drawing. Match panel sizes, post types, gate openings, hardware, and finishes to the same revision.
  2. Choose how the order should arrive. Ask what ships assembled, what is bundled separately, and whether packages can be labeled by run or installation phase. Request package sizes and weights for unloading.
  3. Review the commercial scope. Confirm quantities, any minimum order requirements, estimated lead time, packing, shipping scope, and documentation needed for delivery.

For dealer or recurring inventory programs, see the wholesale aluminum fence supply page.

Contractor ordering questions

Can I mix full-width and custom-width panels?

Submit full-width and custom bays as separate lines. Include the run IDs, finished height, and post reference so the factory can confirm sizes and quantities.

Can the gate match the panel style?

Request matching infill and finish. The frame, posts, and hardware are quoted against the gate opening and operating requirements.

Are anchors and hardware included?

The itemized quotation states which fittings, fasteners, and gate hardware are included. Identify the mounting substrate and ask which anchors or site fixings need to be supplied separately.

Request a contractor wholesale quote

Send your layout and materials list for an itemized quote covering panels, posts, gates, hardware, and packing.

Send your fence materials list
فيسبوك
تويتر
لينكدإن

جدول المحتويات

اتصل بنا

مصنعنا

شركة «تشاينا ووندرفول ميتال» - مصنع متخصص في إنتاج البوابات والأسوار المصنوعة من الألومنيوم.
تُعد شركة «China Wonderful Metal» شركة متخصصة في التصنيع والتصدير، تكرس جهودها لتصميم وإنتاج وتوريد الأسوار المصنوعة من الألومنيوم عالية الجودة، والدرابزينات، وأسوار الحدائق، وأسوار حمامات السباحة، والبوابات المطابقة لها. بفضل سنوات خبرتنا الطويلة في مجال التصنيع ومعدات الإنتاج المتطورة، نركز على توفير حلول أسوار متينة وآمنة ولا تتطلب صيانة كثيرة وذات مظهر جمالي للمشاريع السكنية والتجارية والصناعية في جميع أنحاء العالم. مصنعنا مجهز بخطوط إنتاج كاملة، بما في ذلك بثق الألومنيوم، والقطع الدقيق، واللحام، والتلميع، والطلاء بالمسحوق، ونقل نمط خشب الحبيبات. نحن نراقب كل عملية إنتاج بدقة لضمان جودة ثابتة، وأداء موثوق، وعمر خدمة طويل. جميع منتجاتنا مصنوعة من سبيكة الألومنيوم 6063-T5 عالية الجودة، وهي مقاومة للصدأ والتآكل، وصديقة للبيئة، وقابلة لإعادة التدوير وفقًا لمعيار 100%. ولا تتطلب هذه المنتجات أي طلاء أو صيانة متكررة، مما يوفر الوقت والتكلفة لعملائنا. لقد حصلنا على شهادات CE وRoHS وEN 1090 وICC-ES وAS، مما يضمن استيفاء المعايير الصارمة المعمول بها في أوروبا والولايات المتحدة وأستراليا والأسواق الرئيسية الأخرى.

شعار معدني رائع

تضم شركتنا فريق مبيعات B2B، وفريق البيع بالجملة، وفريق خدمة إعادة التدوير R2U، وفريق الإنتاج.

يتألف فريقنا المختص بالتجارة بين الشركات (B2B) من موظفي المبيعات، والمصممين، وقسم العينات، ومسؤولي متابعة الطلبات، وقسم الشحن، وقسم الفحص، والمحاسبين.

أتطلع إلى الحصول على جلسة التدليك الخاصة بك.

اتصل بنا

الرجوع إلى الأعلى