+8615092174528

LUN - DIM : de 8 h à 22 h

magnifique logo en métal

Wholesale Aluminum Fence Panels for Contractors

Wonderful Metal · Aluminum Fence Manufacturer in Shandong, China

Wholesale Aluminum Fence Panels for Contractors

Source panels, posts, gates, and installation hardware from one factory against a single job layout. Wonderful Metal quotes complete aluminum fence packages for fence contractors, installers, and builders who need the right parts for each run and opening.

Get the contractor materials list

What to include in a wholesale fence package

Fence panels

Choose horizontal privacy or semi-privacy panels, vertical slats or blades, or open pickets. List the finished height and nominal bay width by run. Confirm actual panel dimensions and any short bays on the shop drawings. Browse aluminum fence systems.

Posts and mounting

Separate line, end, corner, hinge, and latch posts. Show where each run terminates at a wall or turns a corner. Identify in-ground or base-plate mounting and flag steps, slopes, or changes in substrate.

Portails assortis

List pedestrian and driveway gates separately. For each opening, give the required clear width, opening method, swing direction or slide direction, infill, and finish. Ask for hinges, latches, locks, stops, and other applicable gate hardware to be itemized.

Connectors and hardware

Include panel brackets or channels, post caps, compatible fasteners, mounting plates, and any requested spares. Identify site-supplied anchors separately so the quote and installation plan use the same scope.

Measure by run and check the post count

Mark the length of each run, corners, ends, and gate openings. State whether dimensions are measured between post centers or clear faces. On an illustrative straight run with eight panel bays and one gate bay located between panels, there are ten post positions: two end posts, six line posts, and two gate posts. Count the hinge and latch posts once even when each also supports an adjoining panel.

List corner posts once per shared corner on multi-run layouts. Where a wall substitutes for a post, mark the connection and request the corresponding brackets. For a solid privacy design on an exposed site, share the project requirements and mounting details for review before the quote is finalized.

Copy this aluminum fence materials list

Select the template below and paste it into your RFQ. Replace the brackets with your quantities and attach a marked-up layout or drawing.

PROJECT / JOB REF: [name]
DELIVERY: [city, ZIP or postal code, country, required date]
LAYOUT: [length by run, total length, units, post reference, steps or slopes]
STYLE / FINISH: [panel style, RAL color, matte/gloss/texture]

PANELS
[qty] full-width panels — [nominal bay width × finished height, infill]
[qty] short/custom panels — [run IDs and dimensions]

POSTS
[qty] line posts
[qty] end posts
[qty] corner posts — [angles]
[qty] gate hinge posts / [qty] gate latch posts
Mounting — [in-ground / base plate, substrate, by run]

GATES
[qty] pedestrian gates — [clear opening width × height, handing and swing]
[qty] driveway gates — [clear opening width × height, swing or slide]
Gate hardware — [hinges, latch/lock, stops, other requirements]

FITTINGS
[qty] post caps / [qty] brackets or channels / [qty] fastener sets
[qty] base plates or covers / [qty] spare fittings
Site-supplied items — [anchors, fixings, or other items]

PACKING AND QUOTE
[flat-packed / preassembled] — [label by run, bundle size limits]
Quote scope — [itemize product, packaging, delivery and requested trade term]
Attachments — [marked-up layout, drawings, photos, project specifications]

Confirm the quote before releasing the order

  1. Check the bill of materials against the drawing. Match panel sizes, post types, gate openings, hardware, and finishes to the same revision.
  2. Choose how the order should arrive. Ask what ships assembled, what is bundled separately, and whether packages can be labeled by run or installation phase. Request package sizes and weights for unloading.
  3. Review the commercial scope. Confirm quantities, any minimum order requirements, estimated lead time, packing, shipping scope, and documentation needed for delivery.

For dealer or recurring inventory programs, see the wholesale aluminum fence supply page.

Contractor ordering questions

Can I mix full-width and custom-width panels?

Submit full-width and custom bays as separate lines. Include the run IDs, finished height, and post reference so the factory can confirm sizes and quantities.

Can the gate match the panel style?

Request matching infill and finish. The frame, posts, and hardware are quoted against the gate opening and operating requirements.

Are anchors and hardware included?

The itemized quotation states which fittings, fasteners, and gate hardware are included. Identify the mounting substrate and ask which anchors or site fixings need to be supplied separately.

Request a contractor wholesale quote

Send your layout and materials list for an itemized quote covering panels, posts, gates, hardware, and packing.

Send your fence materials list
Facebook
Twitter
LinkedIn

Table des matières

Nous contacter

Notre usine

China Wonderful Metal - Fabricant spécialisé dans les portails et clôtures en aluminium.
China Wonderful Metal est un fabricant et exportateur spécialisé dans la conception, la production et la fourniture de clôtures, garde-corps, clôtures de jardin, clôtures de piscine et portails assortis en aluminium de haute qualité. Forts de nombreuses années d’expérience dans la fabrication et dotés d’équipements de production de pointe, nous nous attachons à fournir des solutions de clôtures durables, sûres, nécessitant peu d’entretien et esthétiques pour des projets résidentiels, commerciaux et industriels à travers le monde. Notre usine est équipée de lignes de production complètes, comprenant l’extrusion d’aluminium, la découpe de précision, le soudage, le polissage, le thermolaquage et le transfert de motif bois. Nous contrôlons rigoureusement chaque étape de la production afin de garantir une qualité constante, des performances fiables et une longue durée de vie. Tous nos produits sont fabriqués à partir d’un alliage d’aluminium 6063-T5 de haute qualité, qui est antirouille, résistant à la corrosion, respectueux de l’environnement et recyclable selon la norme 100%. Ils ne nécessitent ni peinture ni entretien fréquent, ce qui permet à nos clients de gagner du temps et de réaliser des économies. Nous avons obtenu les certifications CE, RoHS, EN 1090, ICC-ES et AS, répondant ainsi aux normes strictes en vigueur en Europe, aux États-Unis, en Australie et sur d’autres marchés majeurs.

magnifique logo en métal

Notre entreprise dispose d'une équipe commerciale B2B, d'une équipe de vente en gros, d'une équipe chargée du service « R2U » (recyclage pour réutilisation) et d'une équipe de production.

Notre équipe B2B comprend des commerciaux, un graphiste, un responsable des échantillons, un chargé du suivi des commandes, un responsable des expéditions, un responsable du contrôle qualité et un comptable.

J'ai hâte de profiter de votre massage.

Nous contacter

Retour en haut de la page