Composite Fence Boards & Gate Infill Boards
Coordinate the look of your boundary and entrance with woodgrain composite fencing, matching infill concepts and aluminium support components. WONDERFUL METAL supplies WPC fence systems and welcomes project enquiries for boards, posts, rails and compatible gate designs.
Define the board profile, colour and supporting frame together for a clearer quotation and a consistent outdoor finish.
Woodgrain Composite Fencing for Coordinated Outdoor Projects
Composite fence boards form the visible infill within a supporting fence system. Wood-plastic composite, often shortened to WPC, combines wood-derived fibres with a polymer binder and additives. The exact formulation and profile depend on the product selected.
For gardens, courtyards and landscape boundaries, woodgrain surfaces provide a timber-inspired appearance with less routine refinishing than traditional timber. Aluminium framing gives the designer a contrasting outline and provides the connections needed to build a coordinated panel system.
Begin with our WPC fence product range, then discuss whether your order requires boards only, a complete fence kit or a fence-and-gate package. Standalone board supply and gate compatibility should be confirmed against the chosen profile.
Fence infill boards
Specify the board length, effective cover height, thickness and connection profile. Check how the boards engage with side channels and how the bottom support carries the assembled infill.
Gate infill concepts
Coordinate the colour and visible board rhythm with a purpose-designed gate frame. Board retention, movement allowances and hardware loads require a separate design review.
Complete system enquiries
Combine the selected boards with matching posts, top and bottom rails, caps, covers and specified fixings. A component list makes inclusions and installation responsibilities clear.
Composite Gate Infill Boards: Match the Look, Specify the Frame
Using a coordinated composite finish at the entrance can connect the gate visually with the surrounding fence. The gate itself must still be designed for its opening, operation and loads. Fence infill is not a substitute for a structural gate frame.
When enquiring about composite gate infill boards, include the opening width, gate height, swing or sliding arrangement, preferred board direction and proposed hardware. The frame must retain each board while allowing the movement required by the selected material.
Explore our aluminium gate systems as a starting point for the frame and access arrangement. The suitability of a specific WPC board for a gate must be confirmed before manufacture.
Gate design checklist
- Frame construction and infill fixing method
- Board length, orientation and expansion clearances
- Total leaf weight and suitable support posts
- Hinges, latch, lock and stops where applicable
- Ground clearance and operating space
- Automation requirements, if requested
Request a coordinated drawing for the fence and gate rather than assuming that a fence panel can be hung directly on hinges.
Capped Composite Fencing: What Buyers Should Compare
Capped composite fencing uses boards with an additional outer layer over the composite core. This is often described as co-extruded WPC. The construction of that layer, its coverage and its performance vary by product; “capped” does not describe one universal specification.
If you prefer a capped board, ask WONDERFUL METAL which profiles and colours can be offered for your order. Confirm the board section, cap material and coverage, cut-end details, cleaning instructions and any supporting performance information available for that exact product.
| Comparison point | Conventional WPC | Capped WPC enquiry |
|---|---|---|
| Visible surface | The composite itself forms the exposed surface | An additional cap layer forms some or all exposed faces |
| Appearance | Compare texture, embossing and colour samples | Compare cap finish, texture and colour variation |
| Product evidence | Ask for care and weathering information | Also confirm cap coverage and relevant surface-test information |
| Order comparison | Price the selected board with its support system | Use the same panel size and component scope when comparing prices |
Choose Colours with Physical Samples
WONDERFUL METAL’s WPC range presents grey, brown, black and wood-inspired finishes. Teak, coffee and walnut-style tones can also be discussed against the available product options. Availability depends on the selected profile and order.
For woodgrain composite fencing, compare both the surface texture and the colour beside your intended post finish. A warm board with a dark frame gives a different effect from a grey board with a matching frame.
Request sample availability, sample charges and courier terms before approval. Evaluate the pieces in daylight and retain an agreed reference for the production order. Screen colours and the illustrations here are guides rather than a physical colour standard.
Ask About Board & Colour Samples
Top Rails, Bottom Rails and Matching Posts
A finished boundary needs more than infill boards. The support details determine how the board stack sits, how the panel finishes and how components connect at ends and corners.
Bottom rail or support channel
Confirm the support profile, connection to the posts, permitted span and ground clearance. Keep drainage paths clear and avoid assuming that boards can carry the full panel without the specified support.
Top rail and finishing trims
Agree the top profile and fixing arrangement for the selected design. The finish should be tidy while retaining any clearance needed for movement. Include side covers and closures where required.
Aluminium posts
Coordinate the post slot or bracket with the board and rail geometry. Review end, intermediate and corner positions separately. Explore our aluminium fence posts to discuss mounting and profile requirements.
Prepare a Board and Component Schedule
For an initial privacy-fence enquiry, W1800 × H1800 mm can be used as a reference panel size. Confirm the actual finished dimensions and whether the width describes the panel, clear opening or post centres. The selected drawing determines board lengths and quantities.
| Order item | Information to include |
|---|---|
| Composite fence boards | Profile, colour, cut length, quantity and intended panel layout |
| Composite gate infill boards | Frame opening, orientation, retention detail and compatibility approval |
| Rails and trims | Top and bottom profiles, lengths, finish and fixing method |
| Posts and covers | Post positions, mounting type, profile and component counts |
| سختافزار | Brackets, screws, caps and separate gate fittings |
| Packing and delivery | Boards-only or kits, labels, protection, quantity and destination |
Count effective board coverage rather than dividing panel height by the nominal board width. Tongue-and-groove engagement, rails and clearances can change the finished height.
For Importers, Distributors and Installation Teams
Build a repeatable range
Agree standard colours, board profiles and compatible accessories. Record a component code and approved sample for each option to simplify repeat orders and replacement-part enquiries.
Coordinate project quantities
Separate standard fence bays, short panels, corners and gates in the schedule. Confirm how shared posts are counted and which parts are supplied locally.
Protect the visible finish
Discuss separators, edge protection, hardware bags and pallet or kit labels. Agree handling and unloading arrangements for long boards and framed components.
OEM/ODM enquiries can cover profile development, frame details, colour coordination and packaging. Minimum order quantities, tooling, samples and lead times are confirmed for the actual specification.
Installation and Care Planning
Use the approved instructions for the selected board and support system. Confirm post alignment, rail engagement, board-end gaps, top clearance and ground drainage before completing the fence. Do not rigidly trap boards where the design requires movement.
For gates, test operation and clearance after fitting the infill. For exposed sites, assess the complete assembly with the project’s structural requirements; board material alone does not provide a wind rating.
Clean in accordance with the product’s care instructions and remove accumulated dirt and organic debris. Composite is a low-maintenance choice, but it still needs cleaning and periodic inspection of connections and hardware.
Composite Fence and Gate Infill Board FAQs
Can the same composite boards be used in fences and gates?
A coordinated appearance may be possible, but the selected board must be checked against the gate frame, retention method, weight and movement requirements. Confirm compatibility before ordering.
Do you offer boards only or complete fence systems?
WONDERFUL METAL supplies WPC fence systems. Discuss boards-only quantities or a package with posts, rails and accessories; the quotation will define the available supply format and included components.
Are all WPC boards capped?
No. Capped and conventional WPC have different surface constructions. Confirm the exact profile and cap specification available for your enquiry rather than assuming every board is co-extruded.
Can I request woodgrain colour samples?
Ask about samples for the profile and colour you are considering. Sample availability, charges and delivery terms are confirmed by the sales team.
Are top and bottom rails included?
Inclusions depend on the quoted kit. Ask for a component list covering boards, rails, posts, caps, covers and fixings. Gate hardware and foundation items should be identified separately.
Can the boards fit existing posts?
Fit depends on the post condition, slot geometry, opening and support arrangement. Provide photographs and measurements for review; do not assume universal compatibility.
How do I compare prices?
Compare the same profile, finished panel size, colour, board construction and complete component scope. Add packing and delivery terms so a board-only price is not confused with a full-system quotation.
Request Composite Boards, Rails & Posts for Your Project
Send your layout, board style, preferred colour, fence dimensions, gate openings, quantities and destination. WONDERFUL METAL can review the infill and support details needed for your enquiry.
