Wonderful Metal · Custom ornamental fencing
Double Picket Aluminum Fence
Bring a denser vertical rhythm to your boundary while keeping an open view of the landscape. A double picket aluminum fence uses closer-spaced, full-height pickets to create smaller openings than a comparable standard picket layout.
Discuss a custom double picket configuration with Wonderful Metal for gardens, residential boundaries and commercial landscapes. Coordinate panel dimensions, clear spacing, finish, posts and gates around an approved project drawing.
Discuss Your Double Picket DesignCompare picket layouts →
Understand the design
What Is a Double Picket Aluminum Fence?
In common fence terminology, “double picket” describes a panel with approximately twice as many vertical pickets as its standard-spacing counterpart. The added pickets generally extend through the full panel height, producing a closer-spaced appearance from top to bottom.
It does not usually mean two layers of fencing, paired rails or a double gate. Because terminology varies between suppliers, specify the picket section, quantity and clear opening on the drawing rather than ordering by the name alone.
This design retains visibility through the fence. It should be considered an open ornamental boundary rather than a full privacy fence. If visual screening is your main objective, compare it with horizontal aluminum privacy fencing.
Standard Picket vs Double Picket vs Puppy Picket
| Layout | Picket arrangement | Typical selection reason |
|---|---|---|
| Standard picket | Regular full-height pickets with wider openings | Open appearance and a traditional ornamental boundary |
| Double picket | Additional full-height pickets with closer spacing throughout | Smaller openings and a denser vertical appearance |
| Puppy picket | Additional short pickets concentrated near the bottom | Reduced lower openings while keeping the upper section more open |
| Privacy panel | Close, overlapping or closed infill | Stronger visual screening instead of open picket views |
Double picket and puppy picket are sometimes grouped together in product catalogs. For a precise quote, state whether you need closer spacing over the full height or only in a lower section.
Why Choose a Closer-Spaced Aluminum Picket Fence?
Smaller Openings
Closer spacing reduces the openings between vertical members. Evaluate all gaps, including those beside posts, beneath panels and around gates, for your intended use.
A Defined Boundary
A denser picket pattern creates a more pronounced architectural outline while allowing views of planting, lawns and the surrounding property.
Coordinated Outdoor Style
Match the picket arrangement, rail positions and powder-coated finish across panels and gates to create a consistent entrance and perimeter.
Style & finish
Black Double Picket Aluminum Fence Designs
Black powder coating gives ornamental aluminum fencing a clear silhouette against gardens, stonework and light-colored buildings. Confirm the color reference, texture and gloss with a sample before approving the order.
Discuss a smooth-top design for a clean outline, or explore spear-top and decorative details for a more traditional look. Availability of a closer-spaced version depends on the selected profiles and connection method.
Browse our aluminum picket fence collection to select a starting style, then send your preferred full-height spacing for evaluation.
Double Picket Fence Specifications to Confirm
The following is a design and quotation checklist, not a fixed stock-model specification.
| Specifiche tecniche | What to confirm |
|---|---|
| Dimensioni del pannello | Finished width and height; distinguish nominal size from actual size and post spacing |
| Picket layout | Full-height additional pickets, picket count and consistent clear openings |
| Aluminum material | Alloy, temper, profile sizes and wall thickness appropriate to the selected design |
| Rails and connections | Rail number, positions, profile sections and attachment method |
| Top style | Smooth top, spear top or selected decorative arrangement, subject to design review |
| Fine | Powder coating with sample-approved color, texture and gloss |
| Posts and mounting | Line, corner, end and gate posts; embedded or base-plated mounting |
| Cancelli coordinati | Opening size, operation, infill spacing, hinges, latch and ground clearance |
| Site conditions | Slopes, substrate, exposure and any applicable project requirements |
| Supply and packing | Panel or kit configuration, accessories, labeling and export protection |
How to Specify Picket Spacing
Clear spacing is the open distance between adjacent picket faces. Center-to-center spacing includes the width of a picket and should not be used interchangeably with the clear opening.
For square pickets with a 19 mm face width, a proposed 40 mm clear opening would produce a 59 mm center-to-center pitch. This is a calculation example, not a confirmed Wonderful Metal product specification. The final picket count also depends on panel width, end gaps and connections.
- State the maximum clear opening required for the intended application.
- Define edge openings between the first or last picket and the post or frame.
- Check that gate infill follows the same visual spacing.
- Review the largest opening after any permitted slope adjustment.
Posts, Gates & Sloping Ground
Plan the Posts
Identify end, line, corner and gate positions before ordering. Post sections, anchoring and foundations must suit the panel, site loads and supporting ground or structure.
Match the Gates
Coordinate gate infill with the fence while allowing operating clearances. Confirm hinge and latch gaps, opening direction and any self-closing hardware requirements.
Scopri i cancelli in alluminio →Check Slope Capability
Some picket systems allow racking, while others require stepping or custom panels. Closer spacing can restrict movement; obtain the permitted slope arrangement for the selected system.
For stepped fences, review the opening beneath each panel. On retaining walls or concrete slabs, confirm the substrate can accept the proposed post anchors before installation.
Aluminum Material & Routine Care
Aluminum does not develop red rust like unprotected carbon steel and does not rot like timber. Powder coating provides the visible finish, but preparation, coating quality, hardware compatibility and exposure all affect long-term appearance.
Clean with mild soap, water and a soft cloth, then rinse thoroughly. Avoid abrasive tools. In coastal locations, discuss the finish specification and an appropriate cleaning routine before purchase. Inspect connections and gate operation periodically, and address coating damage using the supplier’s recommended method.
Factory & project supply
Custom Double Picket Enquiries with Wonderful Metal
Wonderful Metal was established in 2021 and combines a Qingdao office with a manufacturing factory in Linqu, Shandong. We bring more than five years of aluminum fence and gate manufacturing experience to custom product and project supply.
For a double picket enquiry, send a reference photo or drawing and the required clear spacing. We can evaluate the proposed layout, matching gate design, finish and supply scope before confirming the quotation.
Contractors can use our contractor fence supply page, while distributors can explore pannelli per recinzioni in alluminio all'ingrosso. For new profiles, branding or packaging, discuss produzione su misura di recinzioni in alluminio.
What Affects the Price?
Additional pickets increase material and fabrication requirements compared with an otherwise equivalent standard-spacing panel. The final price also depends on height, width, profile sections, rail design, finish, quantity, hardware and packaging. Compare quotations using the same drawings and a complete list of panels, posts and gates.
Double Picket Aluminum Fence FAQs
Does double picket mean two layers of fence?
Usually no. It generally describes additional full-height vertical pickets within one panel, creating closer spacing. Confirm the exact arrangement on the drawing.
What is the difference between double picket and puppy picket?
Double picket generally uses closer spacing through the full panel height. Puppy picket typically adds shorter vertical members near the bottom. Supplier names vary, so specify the layout explicitly.
Is a double picket fence a privacy fence?
No. It has smaller openings but still allows views through the panel. Choose a closed infill system if visual screening is your main requirement.
Can I request a black finish and matching gates?
Yes, you can enquire about a coordinated black powder-coated design. Confirm the selected profiles, finish sample, gate opening and hardware with the quotation.
Is it suitable for small dogs?
Suitability depends on the animal and all installed openings. Check picket gaps, gate clearances and ground clearance, along with climbing and digging behavior.
Can double picket panels follow a slope?
That depends on the connection system. Request the permitted racking or stepping arrangement before ordering; a closer-spaced panel should not be assumed to move like a standard panel.
What dimensions and minimum quantities are available?
Send your requested dimensions, quantity and finish. Availability, minimum quantities and production timing are confirmed after the custom layout has been reviewed.
Request a Custom Double Picket Fence Quote
Send your panel width and height, preferred picket size, required clear spacing, total quantity, gate openings and delivery destination. Include a photo or layout so we can evaluate the design and define a complete supply scope.
Send Your Fence RequirementsBrowse Picket Fence Styles
